Hammerhead Series

84 Watt | 20 Amp | 1/8 Brick
 

The Hammerhead series offers an ultra-wide input voltage range from 18 to 75 Vdc with Total Efficiency™ architecture technology that reduces power loss up to 50 percent. Designed for extreme temperature conditions of -40°C to 85°C, the cost-effective Hammerhead DC-DC isolated converters help OEM power design engineers ensure electrical isolation, increase device reliability and accelerate new product introduction across medical, military and other industrial applications. The new Hammerhead modules are available in standards-based eighth-brick DOSA footprints with three voltage options rated for 6 Amp, 15 Amp and 20 Amp output current. Hammerhead leverages the Bell Labs heritage for reliability and quality, while also using the latest technologies in component and process standardization to accelerate adoption through competitive cost. Its wide input and operating temperature range is ideal for use in robotics, test and measurement equipment, medical devices, navigation systems, automotive electronics and cellular infrastructure devices. The open frame module construction, available in both surface mount and through-hole packaging, enables power design engineers to shrink circuit board real estate requirements, while ensuring DOSA footprint compatibility for supply chain sourcing efficiency. All Hammerhead modules achieve typical, full load efficiency greater than 92% at VIN=24Vdc and greater than 90% at VIN=48Vdc. Standard features include remote On/Off, remote sense, output voltage adjustment, over-voltage, over-current and over-temperature protection. An optional heat plate allows for external, standard eighth-brick heat sink attachment to achieve higher output current in extreme temperature environments. Standard features include remote On/Off, remote sense, output voltage adjustment, over-voltage, over-current and over-temperature protection.

APPLICATIONS     
• Distributed Power Architectures
• Wireless Networks
• Industrial

FEATURES     
• Surface mount or through hole versions
• Output overcurrent/overvoltage protection
• Auto restart after fault shutdown

PHYSICAL DIMENSIONS    
• 57.9 mm x 22.8 mm x 7.6 mm
• 2.28 in. x 0.90 in. x 0.30 in.

E

HH

D

006A0B

6

4

1

-

H

SR

Z

Eight Brick

Hammerhead Series

Input
18-75VDC

Output
006A0B=6A@12V

Pins
Blank=4.8mm
6=3.68mm8=2.79mm

OCP/OVP Protection
Blank=latch
4=hiccup

On/Off Logic
Blank=Positive 1=Negative

Mounting
Blank=TH pins
SR=SMT

 RoHS Z=RoHS